Epifanes Epoxy Filler 1500 is a strong two-component finishing filler on epoxy resins. Very fine and shrink free. Provides a very smooth surface. Apply in thin layers only (max. 1 mm.). Prior to use, stir each component separately and then thoroughly together until colour is uniform. Do not use under 12°C. (60°F.). Best sandable properties are between 24 and 48 hours.
For use GRP - Steel - Wood - Aluminium : a fine epoxy finishing filler on use on Epifanes Epoxy Filler 1300 in two-component paint systems above and if needed below the waterline If top coated above the waterline with a one-component finish , first apply one coat Epifanes Poly-urethane Yacht Coating or Poly-urethane Primer.
Re-paintable after 24 hours @18°C.
Mixing ratio by weight by volume 100 : 50 by weight 100 : 50
Application tips: Filled areas must be well degreased with Epifanes Cleaning Solution. This will prevent clogging of grease in the sandpaper and will ensure a better bonding. Follow by sanding with P100-P120.